# somebody speak spanish?

**URL:** <https://forums.digi.com/t/somebody-speak-spanish/11270>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Created:** [June 1, 2010, 6:25pm UTC](https://forums.digi.com/t/somebody-speak-spanish/11270 "2010-06-01T18:25:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hechicero](https://avatars.discourse-cdn.com/v4/letter/h/c2a13f/32.png) [@hechicero](https://forums.digi.com/u/hechicero)\
**Post date:** [June 1, 2010, 6:25pm UTC](https://forums.digi.com/t/somebody-speak-spanish/11270/1 "2010-06-01T18:25:37Z")

</div>

I have a problem with a xbee pro series 2 i need to know how to install a firmware or any software to work it

if somebody speak spanish I’ll be gratefull for your help

---

<div class="post-metadata">

**Author:** ![kavya](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@kavya](https://forums.digi.com/u/kavya)\
**Post date:** [July 27, 2011, 12:21pm UTC](https://forums.digi.com/t/somebody-speak-spanish/11270/2 "2011-07-27T12:21:09Z")

</div>

Hi,

You can upgrade the firmware of the Xbee pro modules using X-CTU software available at digi website, "[http://www.digi.com/support/productdetl.jsp?pid=3352&amp;osvid=57&amp;s=316&amp;tp=5&amp;tp2=0](http://www.digi.com/support/productdetl.jsp?pid=3352&amp;osvid=57&amp;s=316&amp;tp=5&amp;tp2=0) ".

Refer the article at the following link, "[http://www.digi.com/support/kbase/kbaseresultdetl.jsp?id=2103](http://www.digi.com/support/kbase/kbaseresultdetl.jsp?id=2103) ", which describes instructions for upgrading the radio firmware.

Regards!