# SPI support on XBee3

**URL:** <https://forums.digi.com/t/spi-support-on-xbee3/19577>\
**Category:** XBee - DigiMesh\
**Tags:** spi, xbee3\
**Created:** [June 5, 2018, 9:40am UTC](https://forums.digi.com/t/spi-support-on-xbee3/19577 "2018-06-05T09:40:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kamiln](https://avatars.discourse-cdn.com/v4/letter/k/a88e4f/32.png) [@kamiln](https://forums.digi.com/u/kamiln)\
**Post date:** [June 5, 2018, 9:40am UTC](https://forums.digi.com/t/spi-support-on-xbee3/19577/1 "2018-06-05T09:40:50Z")

</div>

When you add support for SPI communication? On specification You have UART, SPI, I2C. It should be noted here that SPI and I2C support is not yet implemented. We tested modules with SPI and get no response. Then we find at firmware release notes that SPI is not implemented. Documentation is very bad at this point. SPI support is essentialy for us…

---

<div class="post-metadata">

**Author:** ![tauzin.nicolas](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@tauzin.nicolas](https://forums.digi.com/u/tauzin.nicolas)\
**Post date:** [November 2, 2018, 2:02pm UTC](https://forums.digi.com/t/spi-support-on-xbee3/19577/2 "2018-11-02T14:02:00Z")

</div>

Hi,

I have the same kind of problem is there a road map for i2c release ?

---

<div class="post-metadata">

**Author:** ![andreastaran](https://avatars.discourse-cdn.com/v4/letter/a/58956e/32.png) [@andreastaran](https://forums.digi.com/u/andreastaran)\
**Post date:** [January 21, 2019, 11:24am UTC](https://forums.digi.com/t/spi-support-on-xbee3/19577/3 "2019-01-21T11:24:27Z")

</div>

Hi,

Any news on road map for i2c release?  
What about SPI master functionality?

Brg  
Andreas