# SR9150 and 93xx A/D board, won't read signals

**URL:** <https://forums.digi.com/t/sr9150-and-93xx-a-d-board-wont-read-signals/9760>\
**Category:** Rabbit\
**Created:** [August 30, 2011, 4:32pm UTC](https://forums.digi.com/t/sr9150-and-93xx-a-d-board-wont-read-signals/9760 "2011-08-30T16:32:33Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Maucher](https://avatars.discourse-cdn.com/v4/letter/m/65b543/32.png) [@Maucher](https://forums.digi.com/u/Maucher)\
**Post date:** [August 30, 2011, 4:32pm UTC](https://forums.digi.com/t/sr9150-and-93xx-a-d-board-wont-read-signals/9760/1 "2011-08-30T16:32:33Z")

</div>

SmartStar SR9150 and 93xx A/D board.  
Dynamic C Premier Version 7.04P3.  
Using the provided samples\smrstar\sstarad3.c, get error:  
“Cannot make coefficients for channel 0”

samples\smrstar\sstarad2.c shows 4095 for varying input current signals on all channels:

Please enter ADC board slot position, 0 thru 6…Slot 0 chosen.

Choose:  
1 to display raw data only  
2 to display voltage only  
3 to display both

CH 0 is 0.00377 V from raw data 4095  
…

I guess it shows 4095 on all channels because the coefficients are not set up, but I can’t set them up as shown above.

Any ideas?
