# stack

**URL:** <https://forums.digi.com/t/stack/451>\
**Category:** XBee - Zigbee\
**Created:** [June 3, 2008, 9:22am UTC](https://forums.digi.com/t/stack/451 "2008-06-03T09:22:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lopex](https://avatars.discourse-cdn.com/v4/letter/l/e79b87/32.png) [@lopex](https://forums.digi.com/u/lopex)\
**Post date:** [June 3, 2008, 9:22am UTC](https://forums.digi.com/t/stack/451/1 "2008-06-03T09:22:19Z")

</div>

The module Xbee and Xbee Pro using stack zigbee 2004 or 2006?

---

<div class="post-metadata">

**Author:** ![gorsanmo](https://avatars.discourse-cdn.com/v4/letter/g/e495f1/32.png) [@gorsanmo](https://forums.digi.com/u/gorsanmo)\
**Post date:** [June 23, 2009, 8:05am UTC](https://forums.digi.com/t/stack/451/2 "2009-06-23T08:05:29Z")

</div>

The module XBee Series 2 is Zigbee compliant and uses zstack 2007

---

<div class="post-metadata">

**Author:** ![Admin1](https://avatars.discourse-cdn.com/v4/letter/a/bbce88/32.png) [@Admin1](https://forums.digi.com/u/Admin1)\
**Post date:** [June 23, 2009, 3:31pm UTC](https://forums.digi.com/t/stack/451/3 "2009-06-23T15:31:00Z")

</div>

This is copied straight from page 6 of the ZB OEM guide found here: [http://ftp1.digi.com/support/documentation/90000976\_C.pdf](http://ftp1.digi.com/support/documentation/90000976_C.pdf)

The XBee/XBee-PRO ZB firmware release can be installed on XBee ZNet or ZB modules. The XBee ZB firmware is based on the EmberZNet 3.x ZigBee PRO Feature Set mesh networking stack, while the XBee ZNet 2.5 firmware is based on Ember’s proprietary “designed for ZigBee” mesh stack (EmberZNet 2.5.x). ZB and ZNet 2.5 firmware are similar in nature, but not over-the-air compatible. Devices running ZNet 2.5 firmware cannot talk to devices running the ZB firmware.