# Support Bit-oriented protocol ?

**URL:** <https://forums.digi.com/t/support-bit-oriented-protocol/7651>\
**Category:** USB Devices\
**Created:** [February 2, 2005, 6:34am UTC](https://forums.digi.com/t/support-bit-oriented-protocol/7651 "2005-02-02T06:34:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/digi/original/1X/11da31a6a1fbcd03ef21d3f785c317c824009ae2.png) [@system](https://forums.digi.com/u/system)\
**Post date:** [February 2, 2005, 6:34am UTC](https://forums.digi.com/t/support-bit-oriented-protocol/7651/1 "2005-02-02T06:34:09Z")

</div>

Does the Digi terminal server support bit-oriented protocol communication, like CDC protocol ?

---

<div class="post-metadata">

**Author:** ![michaelt](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/michaelt/32/92_2.png) [@michaelt](https://forums.digi.com/u/michaelt)\
**Post date:** [February 2, 2005, 3:19pm UTC](https://forums.digi.com/t/support-bit-oriented-protocol/7651/2 "2005-02-02T15:19:12Z")

</div>

It doesn’t have these protocols built in, but it does support ascii and binary communication over the serial ports. Basically, if you could use the protocol over a standard comm port, you should be able to use it through one of our Terminal Server products.