# SX900 cannot set channel mask

**URL:** <https://forums.digi.com/t/sx900-cannot-set-channel-mask/38731>\
**Category:** Other RF Products\
**Created:** [October 5, 2026, 8:56am UTC](https://forums.digi.com/t/sx900-cannot-set-channel-mask/38731 "2026-10-05T08:56:22Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Suppakit](https://avatars.discourse-cdn.com/v4/letter/s/b4bc9f/32.png) [@Suppakit](https://forums.digi.com/u/Suppakit)\
**Post date:** [October 5, 2026, 8:56am UTC](https://forums.digi.com/t/sx900-cannot-set-channel-mask/38731/1 "2026-10-05T08:56:22Z")

</div>

I would like to change the channel mask for SX900 which model number XBP9X-DMUS-001. I try to change the parameters CM but I cannot successfully change it. Even I change Data rate (BR) to 0 or 1.

Earlier, I have been use SX900 in the Australia version (XBP9X-DMUS-021). But it is no longer have that version in stock like now. So I brought US version and expected to changed CM to be use with Australia version

Thank you in advance

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [October 5, 2026, 12:07pm UTC](https://forums.digi.com/t/sx900-cannot-set-channel-mask/38731/2 "2026-10-05T12:07:22Z")

</div>

It is not possible to simply change the channel mask to match the channels used in Australia. While both are 900 MHz, they have different band widths and supported channels.

---

<div class="post-metadata">

**Author:** ![Suppakit](https://avatars.discourse-cdn.com/v4/letter/s/b4bc9f/32.png) [@Suppakit](https://forums.digi.com/u/Suppakit)\
**Post date:** [October 5, 2026, 12:27pm UTC](https://forums.digi.com/t/sx900-cannot-set-channel-mask/38731/3 "2026-10-05T12:27:04Z")

</div>

Is there anyway to upgrade firmware to Australia?

I already have it for 15 pcs. If you have anyway to have please let me know.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [October 5, 2026, 1:43pm UTC](https://forums.digi.com/t/sx900-cannot-set-channel-mask/38731/4 "2026-10-05T13:43:22Z")

</div>

No, it is not possible. The frequencies are set at the factory. This is specially done to ensure that a U.S. version not be used in Australia as part of that certification also has to do with the Label.

---

<div class="post-metadata">

**Author:** ![Suppakit](https://avatars.discourse-cdn.com/v4/letter/s/b4bc9f/32.png) [@Suppakit](https://forums.digi.com/u/Suppakit)\
**Post date:** [October 6, 2026, 1:54am UTC](https://forums.digi.com/t/sx900-cannot-set-channel-mask/38731/5 "2026-10-06T01:54:13Z")

</div>

Do you have any suggestions?

Because we already have it in hand. Can we able to do replacement or any others?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [October 6, 2026, 11:14am UTC](https://forums.digi.com/t/sx900-cannot-set-channel-mask/38731/6 "2026-10-06T11:14:06Z")

</div>

The only option is to talk to your place of purchase about exchanging the parts for the correct ones. Please understand that this is not just a frequency issue but a Certification issue. If I recall, Australia uses the 902. - 928 MHz just like the US. But if I recall it has a notch around 915 - 917 MHz which you can’t operate in. The U.S. version uses the entire 902 - 928 MHz band where by the Australian version does not.
