# There is not an active bootloader in the module in Xbee pro s1 usinng XCTU 6.3.0..please help me

**URL:** <https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module-in-xbee-pro-s1-usinng-xctu-6-3-0-please-help-me/16895>\
**Category:** XBee - 802.15.4\
**Tags:** pro, arduino, 4, 15, 802\
**Created:** [June 7, 2016, 10:32am UTC](https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module-in-xbee-pro-s1-usinng-xctu-6-3-0-please-help-me/16895 "2016-06-07T10:32:58Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![irfan153](https://avatars.discourse-cdn.com/v4/letter/i/a6a055/32.png) [@irfan153](https://forums.digi.com/u/irfan153)\
**Post date:** [June 7, 2016, 10:32am UTC](https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module-in-xbee-pro-s1-usinng-xctu-6-3-0-please-help-me/16895/1 "2016-06-07T10:32:58Z")

</div>



---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [June 7, 2016, 10:54am UTC](https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module-in-xbee-pro-s1-usinng-xctu-6-3-0-please-help-me/16895/2 "2016-06-07T10:54:31Z")

</div>

You are going to need to try to use the recovery function of XCTU. If that does not work, there is nothing else you can do except contact Digi for an RMA only if the module is under warranty.

---

<div class="post-metadata">

**Author:** ![irfan153](https://avatars.discourse-cdn.com/v4/letter/i/a6a055/32.png) [@irfan153](https://forums.digi.com/u/irfan153)\
**Post date:** [June 7, 2016, 4:25pm UTC](https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module-in-xbee-pro-s1-usinng-xctu-6-3-0-please-help-me/16895/3 "2016-06-07T16:25:35Z")

</div>

Thanks for your feedback.

Actually my mistakenly i update the wrong firmware and after that i faced this problem…if you know any solution please let me inform  
Advance thanks

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [June 8, 2016, 9:04am UTC](https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module-in-xbee-pro-s1-usinng-xctu-6-3-0-please-help-me/16895/4 "2016-06-08T09:04:11Z")

</div>

Try using the XBee recovery function in XCTU to load the proper firmware on the radio. Make sure you do this using a board that has the DTR and RTS lines connected or it may not work.

---

<div class="post-metadata">

**Author:** ![Akio\_Nakamura](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@Akio\_Nakamura](https://forums.digi.com/u/Akio_Nakamura)\
**Post date:** [June 11, 2016, 8:22pm UTC](https://forums.digi.com/t/there-is-not-an-active-bootloader-in-the-module-in-xbee-pro-s1-usinng-xctu-6-3-0-please-help-me/16895/5 "2016-06-11T20:22:10Z")

</div>

Correction to my mistake.  
XTCU ver 6.3.2 shall be 6.3.1.