# Threads in micropython for xbee 3

**URL:** <https://forums.digi.com/t/threads-in-micropython-for-xbee-3/22775>\
**Category:** XBee & XBee Gateway\
**Tags:** micropython, thread, xbee3, xbee\
**Created:** [November 4, 2021, 10:32am UTC](https://forums.digi.com/t/threads-in-micropython-for-xbee-3/22775 "2021-11-04T10:32:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![EllieNora](https://avatars.discourse-cdn.com/v4/letter/e/58f4c7/32.png) [@EllieNora](https://forums.digi.com/u/EllieNora)\
**Post date:** [November 4, 2021, 10:32am UTC](https://forums.digi.com/t/threads-in-micropython-for-xbee-3/22775/1 "2021-11-04T10:32:29Z")

</div>

Hello!

I am involved in the programming of XBee 3 RF Zigbee module, in micropythone using threads but with bad luck it seems that it’s not possible as I am doing something wrong or due to the absence of uasyncio or threads.

Tell me now how can I make it possible? By searching out its solution I found out xbee python’s library. Tell me how , where and when it required? Because I don’t have its how know using [Schottky diode](https://www.theengineeringprojects.com/2019/09/what-is-the-schottky-diode.html).

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [November 9, 2021, 11:12am UTC](https://forums.digi.com/t/threads-in-micropython-for-xbee-3/22775/2 "2021-11-09T11:12:25Z")

</div>

No the XBee 3 modules are not able to support threading.