# TouchPanel via USB on CC6UL pro

**URL:** <https://forums.digi.com/t/touchpanel-via-usb-on-cc6ul-pro/20299>\
**Category:** Linux\
**Tags:** usb, driver, ccimx6ulsbc, touch\
**Created:** [March 1, 2019, 11:12am UTC](https://forums.digi.com/t/touchpanel-via-usb-on-cc6ul-pro/20299 "2019-03-01T11:12:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![genzo436](https://avatars.discourse-cdn.com/v4/letter/g/65b543/32.png) [@genzo436](https://forums.digi.com/u/genzo436)\
**Post date:** [March 1, 2019, 11:12am UTC](https://forums.digi.com/t/touchpanel-via-usb-on-cc6ul-pro/20299/1 "2019-03-01T11:12:31Z")

</div>

Hi,  
I am working with a “ConnectCore 6UL SBC Pro” development board, so far I was working with a Fusion 7" displaw with an I2C TouchPanel, everything working as expected.

Now I need to switch the display to a bigger one with an USB touch interface, It´s supposed to work with the NTRIG driver. When I connect the usb cable, it´s detected (used lsusb), but not recognised as a touch device.

Do i need to manually add/enable the driver?, if so, where and how do I do it?, I am still a newbie with Yocto, any comments or guides will help a lot

---

<div class="post-metadata">

**Author:** ![LeonidM](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@LeonidM](https://forums.digi.com/u/LeonidM)\
**Post date:** [March 1, 2019, 11:38am UTC](https://forums.digi.com/t/touchpanel-via-usb-on-cc6ul-pro/20299/2 "2019-03-01T11:38:33Z")

</div>

yes, you need a touch driver for that device enabled and kernel and in the device tree. Might be in a human interface category