# TransPort WR41v2

**URL:** <https://forums.digi.com/t/transport-wr41v2/337>\
**Category:** Digi TransPort WR (Series)\
**Created:** [August 23, 2011, 8:22pm UTC](https://forums.digi.com/t/transport-wr41v2/337 "2011-08-23T20:22:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![wedwards](https://avatars.discourse-cdn.com/v4/letter/w/90ced4/32.png) [@wedwards](https://forums.digi.com/u/wedwards)\
**Post date:** [August 23, 2011, 8:22pm UTC](https://forums.digi.com/t/transport-wr41v2/337/1 "2011-08-23T20:22:21Z")

</div>

I am having trouble updating the firmware of this device either through idigi or through the UI on the device.

I am getting this error message in Idigi:

Error Details:  
00042DFF-FF02BA96: Failed with status[12]: Aborted By Target

I am getting a CRC error, and it doesn’t seem to matter which update file I am using through the UI.

The device currently uses v5123, any firmware after that here: [http://transport.digi.com/digi/firmware/ftp/](http://transport.digi.com/digi/firmware/ftp/) fails with a CRC error on the XXXXX.dwn file.

Any help would be appreciated. Thank you.

---

<div class="post-metadata">

**Author:** ![Yeshas](https://avatars.discourse-cdn.com/v4/letter/y/a88e4f/32.png) [@Yeshas](https://forums.digi.com/u/Yeshas)\
**Post date:** [June 13, 2012, 3:05pm UTC](https://forums.digi.com/t/transport-wr41v2/337/2 "2012-06-13T15:05:58Z")

</div>

Hi,

Please update the firmware using the flashwriter.

Refer to the link below

[http://www.digi.com/support/productdetail?pid=5500&amp;type=firmware](http://www.digi.com/support/productdetail?pid=5500&amp;type=firmware)
