# Two Acceleport RAS8 on Win2k3 R2 setup freezes

**URL:** <https://forums.digi.com/t/two-acceleport-ras8-on-win2k3-r2-setup-freezes/8108>\
**Category:** USB Devices\
**Created:** [August 26, 2008, 10:16am UTC](https://forums.digi.com/t/two-acceleport-ras8-on-win2k3-r2-setup-freezes/8108 "2008-08-26T10:16:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![meetra](https://avatars.discourse-cdn.com/v4/letter/m/5fc32e/32.png) [@meetra](https://forums.digi.com/u/meetra)\
**Post date:** [August 26, 2008, 10:16am UTC](https://forums.digi.com/t/two-acceleport-ras8-on-win2k3-r2-setup-freezes/8108/1 "2008-08-26T10:16:09Z")

</div>

Hello,

I’ve the same problem with two Digi Acceleport RAS 8. I’ve the latest drivers (5.0.314.0) and I’m using Windows 2003 R2 SP2.

There’s something unusual with this configuration. We have 4 servers with 2 cards each, sometimes it hangs the OS and sometimes it doesn’t answer the fax calls. I can only recieve about 250 faxes. With only one card the system works like a charm recieving at least 2000 faxes.

I’m using FaxNow 5.02 build [799.net](http://799.net) and HP dc7600 CMT.

---

<div class="post-metadata">

**Author:** ![Admin1](https://avatars.discourse-cdn.com/v4/letter/a/bbce88/32.png) [@Admin1](https://forums.digi.com/u/Admin1)\
**Post date:** [August 26, 2008, 2:15pm UTC](https://forums.digi.com/t/two-acceleport-ras8-on-win2k3-r2-setup-freezes/8108/2 "2008-08-26T14:15:53Z")

</div>

This issue sounds like a possible IRQ conflict, which is something we see on occasion and behaves symptomatically like what you’ve described.

Here’s a link to one of the articles in our knowledgebase which describes some steps you can take to resolve these:  
[http://www.digi.com/support/kbase/kbaseresultdetl.jsp?id=223](http://www.digi.com/support/kbase/kbaseresultdetl.jsp?id=223)

---

<div class="post-metadata">

**Author:** ![meetra](https://avatars.discourse-cdn.com/v4/letter/m/5fc32e/32.png) [@meetra](https://forums.digi.com/u/meetra)\
**Post date:** [August 26, 2008, 6:52pm UTC](https://forums.digi.com/t/two-acceleport-ras8-on-win2k3-r2-setup-freezes/8108/3 "2008-08-26T18:52:26Z")

</div>

There’s no IRQ conflict. I’ve also switched off USB/Audio/Diskette/Parallel Port.

— EDIT —

I’m also having some errors in the event log:

ID 2019: The server was unable to allocate from the system nonpaged pool because the pool was empty.

ID 333: An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in or write out or flush one of the files that contain the system’s image of the Registry.

I only have one CPU and 2GB RAM per server.