# Tx Current on a module on PL=0

**URL:** <https://forums.digi.com/t/tx-current-on-a-module-on-pl-0/1000>\
**Category:** XBee - Zigbee\
**Created:** [January 29, 2013, 5:03pm UTC](https://forums.digi.com/t/tx-current-on-a-module-on-pl-0/1000 "2013-01-29T17:03:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pieter.smart](https://avatars.discourse-cdn.com/v4/letter/p/258eb7/32.png) [@pieter.smart](https://forums.digi.com/u/pieter.smart)\
**Post date:** [January 29, 2013, 5:03pm UTC](https://forums.digi.com/t/tx-current-on-a-module-on-pl-0/1000/1 "2013-01-29T17:03:38Z")

</div>

Hi,

I would like to know what the Tx current is on a S2 non-pro module that is on PL=0 boost mode enabled, I need to know this to calculate battery life and so I can state it in spec.

What I have so far;  
Tx current at PL=4, Boost enabled = 40mA  
Tx current on Pro international module (Pro fixed at PL=4) = 170mA

Tx current at PL=0, Boost enabled = ???

The data sheet shows the dBm at PL=0 but nothing aboutt he Tx current at PL=0.

---

<div class="post-metadata">

**Author:** ![pieter.smart](https://avatars.discourse-cdn.com/v4/letter/p/258eb7/32.png) [@pieter.smart](https://forums.digi.com/u/pieter.smart)\
**Post date:** [January 30, 2013, 10:12am UTC](https://forums.digi.com/t/tx-current-on-a-module-on-pl-0/1000/2 "2013-01-30T10:12:06Z")

</div>

I have tried to read the module current usage through P6 and R31 on the Dev board, but the current read doesnt change no matter if it is Tx or Rx.
