# unable to recover the module

**URL:** <https://forums.digi.com/t/unable-to-recover-the-module/17020>\
**Category:** XBee - 802.15.4\
**Tags:** xbee\
**Created:** [July 2, 2016, 9:47pm UTC](https://forums.digi.com/t/unable-to-recover-the-module/17020 "2016-07-02T21:47:49Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![csreddy](https://avatars.discourse-cdn.com/v4/letter/c/13edae/32.png) [@csreddy](https://forums.digi.com/u/csreddy)\
**Post date:** [July 2, 2016, 9:47pm UTC](https://forums.digi.com/t/unable-to-recover-the-module/17020/1 "2016-07-02T21:47:49Z")

</div>

XCTU is unable to detect the Radio module.  
–\> “Action Require - Reset your radio module. If this dialog is no closed within 10 seconds, click cancel”

So, I try the recovery tool with Produce family: XB8-DM, while recover the module boar dis asking reset if gave reset also is not taking. not the dialog is not closed.

can you please advice me how can i able to recover the module

one more is their any problem to corrupted firmware when i am changing settings in API mode

---

<div class="post-metadata">

**Author:** ![asgm](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/asgm/32/3688_2.png) [@asgm](https://forums.digi.com/u/asgm)\
**Post date:** [July 4, 2016, 4:49am UTC](https://forums.digi.com/t/unable-to-recover-the-module/17020/2 "2016-07-04T04:49:36Z")

</div>

No, changing API mode don’t create any issue to module.

Either you module has more serious issues or its dead. Contact Digi Technical Support for assistance.

---

<div class="post-metadata">

**Author:** ![DystopianFerret](https://avatars.discourse-cdn.com/v4/letter/d/71e660/32.png) [@DystopianFerret](https://forums.digi.com/u/DystopianFerret)\
**Post date:** [July 6, 2016, 1:41pm UTC](https://forums.digi.com/t/unable-to-recover-the-module/17020/3 "2016-07-06T13:41:57Z")

</div>

What configuration program are you using?

What interface board is your radio module using?

---

<div class="post-metadata">

**Author:** ![csreddy](https://avatars.discourse-cdn.com/v4/letter/c/13edae/32.png) [@csreddy](https://forums.digi.com/u/csreddy)\
**Post date:** [July 7, 2016, 4:31am UTC](https://forums.digi.com/t/unable-to-recover-the-module/17020/4 "2016-07-07T04:31:41Z")

</div>

i am using xbee s8 with firware vesion of 8059  
and i am using DIGI usb board

---

<div class="post-metadata">

**Author:** ![DystopianFerret](https://avatars.discourse-cdn.com/v4/letter/d/71e660/32.png) [@DystopianFerret](https://forums.digi.com/u/DystopianFerret)\
**Post date:** [July 7, 2016, 10:29am UTC](https://forums.digi.com/t/unable-to-recover-the-module/17020/5 "2016-07-07T10:29:58Z")

</div>

If XCTU can’t detect the radio, there’s 3 possibilities

1 - the radio module is bad  
2 - the interface board is bad  
3 - the loopback jumper on the interface board is closed and preventing any transfer of data between the module and the PC

---

<div class="post-metadata">

**Author:** ![Rocker1446](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/rocker1446/32/21_2.png) [@Rocker1446](https://forums.digi.com/u/Rocker1446)\
**Post date:** [July 7, 2016, 11:25am UTC](https://forums.digi.com/t/unable-to-recover-the-module/17020/6 "2016-07-07T11:25:28Z")

</div>

Hello CSreddy,

Your XB8-DM isn’t the programmable variant by chance?

You can tell by the part number.

XB8-DMRSB002 (The “B” before the 002 designates programmable)

If it is programmable, then XCTU has a checkbox for this.

---

<div class="post-metadata">

**Author:** ![csreddy](https://avatars.discourse-cdn.com/v4/letter/c/13edae/32.png) [@csreddy](https://forums.digi.com/u/csreddy)\
**Post date:** [July 9, 2016, 2:10am UTC](https://forums.digi.com/t/unable-to-recover-the-module/17020/7 "2016-07-09T02:10:42Z")

</div>

yes its programmable module only

the part number is XBee8-DMUS-002
