# Update Portserver TS2

**URL:** <https://forums.digi.com/t/update-portserver-ts2/13763>\
**Category:** Realport\
**Tags:** firmware-update, portserver\
**Created:** [October 17, 2014, 4:21am UTC](https://forums.digi.com/t/update-portserver-ts2/13763 "2014-10-17T04:21:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![piesslingergmbh](https://avatars.discourse-cdn.com/v4/letter/p/6bbea6/32.png) [@piesslingergmbh](https://forums.digi.com/u/piesslingergmbh)\
**Post date:** [October 17, 2014, 4:21am UTC](https://forums.digi.com/t/update-portserver-ts2/13763/1 "2014-10-17T04:21:11Z")

</div>

We have a Portserver TS2 (pretty old one) and tried to update to a actual Firmware (e.g. 82000747\_W). Because of less space on the flashdisc we are unable to proceed with this. The Problem is that we want to connect this PS to a Windows Server 2008R2 with Setup wizard 40002549\_E. The program is unable to find the specific device, others are displayed normaly.

What can we to?

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [October 20, 2014, 12:08pm UTC](https://forums.digi.com/t/update-portserver-ts2/13763/2 "2014-10-20T12:08:13Z")

</div>

If this is the old legacy model, you may need to use the following firmware image:

[http://www.digi.com/support/productdetail?pid=2253&amp;type=firmware](http://www.digi.com/support/productdetail?pid=2253&amp;type=firmware)

Also, you might need to manually add the IP address for this unit within the RealPort driver set-up.