# Updating Programmable XBee-PRO 900HP to 10K firmware not working

**URL:** <https://forums.digi.com/t/updating-programmable-xbee-pro-900hp-to-10k-firmware-not-working/11538>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Tags:** xbee-900hp\
**Created:** [May 31, 2013, 4:20pm UTC](https://forums.digi.com/t/updating-programmable-xbee-pro-900hp-to-10k-firmware-not-working/11538 "2013-05-31T16:20:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jefffhaynes](https://avatars.discourse-cdn.com/v4/letter/j/ec9cab/32.png) [@jefffhaynes](https://forums.digi.com/u/jefffhaynes)\
**Post date:** [May 31, 2013, 4:20pm UTC](https://forums.digi.com/t/updating-programmable-xbee-pro-900hp-to-10k-firmware-not-working/11538/1 "2013-05-31T16:20:24Z")

</div>

I need my Programmable XBee-PRO 900HP to use the 10K Point/Multipoint firmware. However, after updating it seems to stop working. Attaching the debugger shows that sys\_hw\_init never returns and appears to be stuck on something to do with the UART. The unit is basically useless to me in DigiMesh mode. Help!

---

<div class="post-metadata">

**Author:** ![jefffhaynes](https://avatars.discourse-cdn.com/v4/letter/j/ec9cab/32.png) [@jefffhaynes](https://forums.digi.com/u/jefffhaynes)\
**Post date:** [June 10, 2013, 8:19pm UTC](https://forums.digi.com/t/updating-programmable-xbee-pro-900hp-to-10k-firmware-not-working/11538/2 "2013-06-10T20:19:39Z")

</div>

Once again Digi, thanks for nothing. Another sterling example of your legendary support…