# very long time before api 'xt\_status'

**URL:** <https://forums.digi.com/t/very-long-time-before-api-xt-status/1708>\
**Category:** XBee - 802.15.4\
**Created:** [July 19, 2011, 6:41pm UTC](https://forums.digi.com/t/very-long-time-before-api-xt-status/1708 "2011-07-19T18:41:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![charles.arthur](https://avatars.discourse-cdn.com/v4/letter/c/6bbea6/32.png) [@charles.arthur](https://forums.digi.com/u/charles.arthur)\
**Post date:** [July 19, 2011, 6:41pm UTC](https://forums.digi.com/t/very-long-time-before-api-xt-status/1708/1 "2011-07-19T18:41:40Z")

</div>

I send four messages from a server to one client once every two seconds. The packets are all tx\_64 and about one\_hundred byte payloads. The client receives each almost immediately. However  
I do not see the first successful ‘tx status’ until after the last message was sent. I’m running 9600 baud, no handshake, xbp24 10e8 and 10e6. x\_ctu shows absolutely no cca or ack failures. There is no other 2.54 ghz activity. Is this normal?

---

<div class="post-metadata">

**Author:** ![charles.arthur](https://avatars.discourse-cdn.com/v4/letter/c/6bbea6/32.png) [@charles.arthur](https://forums.digi.com/u/charles.arthur)\
**Post date:** [July 19, 2011, 6:55pm UTC](https://forums.digi.com/t/very-long-time-before-api-xt-status/1708/2 "2011-07-19T18:55:19Z")

</div>

Never mind, I made an obvious mistake.
