# water quality monitoring using xbee and arduino **URL:** \ **Category:** XBee - Zigbee\ **Tags:** xbeearduino\ **Created:** [February 23, 2017, 10:52am UTC](https://forums.digi.com/t/water-quality-monitoring-using-xbee-and-arduino/18062 "2017-02-23T10:52:54Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![kushman](https://avatars.discourse-cdn.com/v4/letter/k/ecd19e/32.png) [@kushman](https://forums.digi.com/u/kushman)\ **Post date:** [February 23, 2017, 10:52am UTC](https://forums.digi.com/t/water-quality-monitoring-using-xbee-and-arduino/18062/1 "2017-02-23T10:52:54Z")
Hi all i need help on how to code this project. i’m to set up a network having 3 different nodes Node A: consist of arduino, xbee radio, turbidity sensor and temperature sensor. Node B: consist of arduino, xbee radio, turbidity sensor and temperature sensor. Node C: consist of arduino, xbee radio and LCD screen aim is that node A collect data and send to Node C. Node B likewise collect data and send to Node C and result shown on LCD screen Thanks ---
**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\ **Post date:** [February 23, 2017, 11:09am UTC](https://forums.digi.com/t/water-quality-monitoring-using-xbee-and-arduino/18062/2 "2017-02-23T11:09:58Z")
May I suggest you first take the radios out of this and get it working with a cable between the units? ---
**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\ **Post date:** [February 23, 2017, 11:11am UTC](https://forums.digi.com/t/water-quality-monitoring-using-xbee-and-arduino/18062/3 "2017-02-23T11:11:37Z")
This is also something that is most likely best asked on an Arduino forum. Especially since the radio in this case is nothing more than a cable or way to send the data from device A, B and C.