# Web UI is not accessible for a digi device AnywhereUSB 5M

**URL:** <https://forums.digi.com/t/web-ui-is-not-accessible-for-a-digi-device-anywhereusb-5m/13392>\
**Category:** Edgeport\
**Tags:** anywhereusb\
**Created:** [July 30, 2014, 4:36pm UTC](https://forums.digi.com/t/web-ui-is-not-accessible-for-a-digi-device-anywhereusb-5m/13392 "2014-07-30T16:36:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![WillC](https://avatars.discourse-cdn.com/v4/letter/w/278dde/32.png) [@WillC](https://forums.digi.com/u/WillC)\
**Post date:** [July 30, 2014, 4:36pm UTC](https://forums.digi.com/t/web-ui-is-not-accessible-for-a-digi-device-anywhereusb-5m/13392/1 "2014-07-30T16:36:58Z")

</div>

AnywhereUSB utility works fine on my Windows 2008 R2 server. I can use it to configure IP and connect to the digi device. However, I was not able to open Web UI from the utility, or browse the page in IE 8/9 using the device IP. I hope I can configure the port group in Web UI to utilize the multi host connection.

The device firmware is V.138.1013.

anyone can help? thanks,

---

<div class="post-metadata">

**Author:** ![sans0909](https://avatars.discourse-cdn.com/v4/letter/s/779978/32.png) [@sans0909](https://forums.digi.com/u/sans0909)\
**Post date:** [September 12, 2014, 6:51am UTC](https://forums.digi.com/t/web-ui-is-not-accessible-for-a-digi-device-anywhereusb-5m/13392/2 "2014-09-12T06:51:12Z")

</div>

reset to factory default and update the firmware
