# what is the DIA device drivers to be used for for device XS-Z16-CB2R ?

**URL:** <https://forums.digi.com/t/what-is-the-dia-device-drivers-to-be-used-for-for-device-xs-z16-cb2r/14340>\
**Category:** Python\
**Tags:** drop-in-networking, xbee\
**Created:** [February 11, 2015, 8:06am UTC](https://forums.digi.com/t/what-is-the-dia-device-drivers-to-be-used-for-for-device-xs-z16-cb2r/14340 "2015-02-11T08:06:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hpiotm2m](https://avatars.discourse-cdn.com/v4/letter/h/e480ec/32.png) [@Hpiotm2m](https://forums.digi.com/u/Hpiotm2m)\
**Post date:** [February 11, 2015, 8:06am UTC](https://forums.digi.com/t/what-is-the-dia-device-drivers-to-be-used-for-for-device-xs-z16-cb2r/14340/1 "2015-02-11T08:06:14Z")

</div>

I am very new to digi and Zigbee products. I am trying to configure the sensor device XS-Z16-CB2R to use the channel information on DIA ( connectport X2e ZB gateway).

what is the device driver name to be used for this ?

following is the device driver for dummy device.

# The template device driver; creates a demonstration device

# containing a counter and a set of channels implementing a simple

# adder.

- name: template  
driver: devices.template\_device:TemplateDevice  
settings:  
count\_init: 0  
update\_rate: 1.0

is the python device driver is by default available on connectport x2e ZB gateway ?

Thanks in advance,  
Vijay

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [February 11, 2015, 3:52pm UTC](https://forums.digi.com/t/what-is-the-dia-device-drivers-to-be-used-for-for-device-xs-z16-cb2r/14340/2 "2015-02-11T15:52:52Z")

</div>

You should download the Digi ESP development platform which will provide drivers/examples:

[http://www.digi.com/support/productdetail?pid=5591&amp;type=drivers](http://www.digi.com/support/productdetail?pid=5591&amp;type=drivers)
