# what problems occur when configuring S2 and S2B xbee modules?

**URL:** <https://forums.digi.com/t/what-problems-occur-when-configuring-s2-and-s2b-xbee-modules/11690>\
**Category:** XBee - 802.15.4\
**Tags:** xbee\
**Created:** [July 8, 2013, 2:09am UTC](https://forums.digi.com/t/what-problems-occur-when-configuring-s2-and-s2b-xbee-modules/11690 "2013-07-08T02:09:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![purnima](https://avatars.discourse-cdn.com/v4/letter/p/49beb7/32.png) [@purnima](https://forums.digi.com/u/purnima)\
**Post date:** [July 8, 2013, 2:09am UTC](https://forums.digi.com/t/what-problems-occur-when-configuring-s2-and-s2b-xbee-modules/11690/1 "2013-07-08T02:09:58Z")

</div>

No communication occurs between the two modules. I noticed the CTS status line on one of the xbees is not green.However the xbees are programmed according to the instructions given by your site.

---

<div class="post-metadata">

**Author:** ![asgm](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/asgm/32/3688_2.png) [@asgm](https://forums.digi.com/u/asgm)\
**Post date:** [July 9, 2013, 4:27am UTC](https://forums.digi.com/t/what-problems-occur-when-configuring-s2-and-s2b-xbee-modules/11690/2 "2013-07-09T04:27:33Z")

</div>

You only need to set same PAN id values in both modules.

---

<div class="post-metadata">

**Author:** ![16ksa23](https://avatars.discourse-cdn.com/v4/letter/1/aeb1de/32.png) [@16ksa23](https://forums.digi.com/u/16ksa23)\
**Post date:** [September 28, 2013, 12:14pm UTC](https://forums.digi.com/t/what-problems-occur-when-configuring-s2-and-s2b-xbee-modules/11690/3 "2013-09-28T12:14:19Z")

</div>

Also set SC to maximum to scan all the channels.
