# What settings have priority.

**URL:** <https://forums.digi.com/t/what-settings-have-priority/12905>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Tags:** xbee-pro-s2b, settings-xctu\
**Created:** [May 5, 2014, 8:10am UTC](https://forums.digi.com/t/what-settings-have-priority/12905 "2014-05-05T08:10:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dmdeangelo](https://avatars.discourse-cdn.com/v4/letter/d/7bcc69/32.png) [@dmdeangelo](https://forums.digi.com/u/dmdeangelo)\
**Post date:** [May 5, 2014, 8:10am UTC](https://forums.digi.com/t/what-settings-have-priority/12905/1 "2014-05-05T08:10:02Z")

</div>

Hello everybody.  
I’m having doubts about the programming modules.  
What settings have priority. Settings (network) that I do at XCTU or settings (network) that I put in my program?

Thanks.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [May 5, 2014, 11:10am UTC](https://forums.digi.com/t/what-settings-have-priority/12905/2 "2014-05-05T11:10:35Z")

</div>

The ones you set on the RF processor via XCTU are what are used on power up. But once your application is launched, any settings in that application that pertain to the RF processor will be used and will take priority.

---

<div class="post-metadata">

**Author:** ![dmdeangelo](https://avatars.discourse-cdn.com/v4/letter/d/7bcc69/32.png) [@dmdeangelo](https://forums.digi.com/u/dmdeangelo)\
**Post date:** [May 5, 2014, 2:00pm UTC](https://forums.digi.com/t/what-settings-have-priority/12905/3 "2014-05-05T14:00:50Z")

</div>

I’m using an ED (firmware), my application does not require join and transmissions are broadcast, but when he comes back from hibernation my program stops working, I think it is because the join. The application does not run if it does not find a Coordinator.

How can I solve this?
