# wr44 serial connections are established but no data is displayed

**URL:** <https://forums.digi.com/t/wr44-serial-connections-are-established-but-no-data-is-displayed/15529>\
**Category:** Digi TransPort WR (Series)\
**Tags:** serial-interface\
**Created:** [October 7, 2015, 9:50am UTC](https://forums.digi.com/t/wr44-serial-connections-are-established-but-no-data-is-displayed/15529 "2015-10-07T09:50:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dlg](https://avatars.discourse-cdn.com/v4/letter/d/7feea3/32.png) [@dlg](https://forums.digi.com/u/dlg)\
**Post date:** [October 7, 2015, 9:50am UTC](https://forums.digi.com/t/wr44-serial-connections-are-established-but-no-data-is-displayed/15529/1 "2015-10-07T09:50:02Z")

</div>

connections made via putty thru serial0 or asy ports show connections established but nothing is displayed in session?

---

<div class="post-metadata">

**Author:** ![James.Wilson](https://avatars.discourse-cdn.com/v4/letter/j/53a042/32.png) [@James.Wilson](https://forums.digi.com/u/James.Wilson)\
**Post date:** [October 8, 2015, 8:43am UTC](https://forums.digi.com/t/wr44-serial-connections-are-established-but-no-data-is-displayed/15529/2 "2015-10-08T08:43:09Z")

</div>

That would depend on what you are expecting

if it is a console connection to the router through putty have you set it to the correct baud rate and speed and are you using the correct cable pinouts that are in the user guide ?