# wva-j200 default telnet login user+pw

**URL:** <https://forums.digi.com/t/wva-j200-default-telnet-login-user-pw/17412>\
**Category:** Interface/Development Boards\
**Tags:** telnet\
**Created:** [September 19, 2016, 8:02am UTC](https://forums.digi.com/t/wva-j200-default-telnet-login-user-pw/17412 "2016-09-19T08:02:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![john1a34](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@john1a34](https://forums.digi.com/u/john1a34)\
**Post date:** [September 19, 2016, 8:02am UTC](https://forums.digi.com/t/wva-j200-default-telnet-login-user-pw/17412/1 "2016-09-19T08:02:42Z")

</div>

I need the default user and password to login using telnet on the wva-j200.

Anyone ?

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [September 19, 2016, 9:06am UTC](https://forums.digi.com/t/wva-j200-default-telnet-login-user-pw/17412/2 "2016-09-19T09:06:42Z")

</div>

There is no telnet or command line access available on this product line.

---

<div class="post-metadata">

**Author:** ![john1a34](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@john1a34](https://forums.digi.com/u/john1a34)\
**Post date:** [September 19, 2016, 12:27pm UTC](https://forums.digi.com/t/wva-j200-default-telnet-login-user-pw/17412/3 "2016-09-19T12:27:51Z")

</div>

Thank you.  
I guess it is possible to use putty + ssh to login.  
But I don’t know the user + password.  
Can you perhaps tell me these ?