# WVA-J200 python support canbus/J1939

**URL:** <https://forums.digi.com/t/wva-j200-python-support-canbus-j1939/17434>\
**Category:** Python\
**Tags:** wva-j200, j1939, python\
**Created:** [September 22, 2016, 11:05am UTC](https://forums.digi.com/t/wva-j200-python-support-canbus-j1939/17434 "2016-09-22T11:05:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![john1a34](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@john1a34](https://forums.digi.com/u/john1a34)\
**Post date:** [September 22, 2016, 11:05am UTC](https://forums.digi.com/t/wva-j200-python-support-canbus-j1939/17434/1 "2016-09-22T11:05:35Z")

</div>

I need to understand if the wva-j200 has the digicanbus.py module built in.  
The python log says:

Sep 20 09:22:22 local7.info pylog: Traceback (most recent call last):  
Sep 20 09:22:22 local7.info pylog: File “J1939Sample.py”, line 2, in  
Sep 20 09:22:22 local7.info pylog: from digicanbus import \*  
Sep 20 09:22:22 local7.info pylog: ImportError: No module named digicanbus

Because until now I haven’t found a way to get this device to listen to my own defined J1939 messages on the canbus.

It supports python, but i am not sure if this is intended to be used at all …