# X-Bee S3B   and XCTU 6.0

**URL:** <https://forums.digi.com/t/x-bee-s3b-and-xctu-6-0/12662>\
**Category:** XCTU\
**Tags:** windows-8, xctu, xbee\
**Created:** [March 13, 2014, 2:54am UTC](https://forums.digi.com/t/x-bee-s3b-and-xctu-6-0/12662 "2014-03-13T02:54:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![psireaper9](https://avatars.discourse-cdn.com/v4/letter/p/e9bcb4/32.png) [@psireaper9](https://forums.digi.com/u/psireaper9)\
**Post date:** [March 13, 2014, 2:54am UTC](https://forums.digi.com/t/x-bee-s3b-and-xctu-6-0/12662/1 "2014-03-13T02:54:00Z")

</div>

Hey guys I am new to Xbee’s and all information I have sought out on interacting with them seems to feature the old version of XCTU.  
I am using Windows 8 so I am currently running 6.0, the newest version. Also the Xbee’s in question are the Model XBP9B. Here are a couple of questions if you guys don’t mind.

1. How do you do set the xbee’s as a  
◦C: Coordinator  
◦R: Router  
It seems fairly straight forward for prior versions of XCTU but I can’t find anything on 6.0.
2. How do you do a range test? I’ve plugged a development board into my labtop and another development board into the power connection and it responds with “local device does not support range test”.

If anyone can give me advice I would appreciate it.

Caleb

---

<div class="post-metadata">

**Author:** ![rdeabill](https://avatars.discourse-cdn.com/v4/letter/r/91b2a8/32.png) [@rdeabill](https://forums.digi.com/u/rdeabill)\
**Post date:** [March 13, 2014, 3:29am UTC](https://forums.digi.com/t/x-bee-s3b-and-xctu-6-0/12662/2 "2014-03-13T03:29:27Z")

</div>

HI,

The C and R settings can be set in the Configuration tab. Once you have connected to the local XBee with magnifying Glass Icon on the left, click on the Gear Icon on the right. This will read the Xbee configuration. Scroll down to the Network section, and look at the CE entry.

The range test is under the Tools item, Spanner and screwdriver. This will try to discover remote node and then run the test on the selected node

---

<div class="post-metadata">

**Author:** ![psireaper9](https://avatars.discourse-cdn.com/v4/letter/p/e9bcb4/32.png) [@psireaper9](https://forums.digi.com/u/psireaper9)\
**Post date:** [March 14, 2014, 11:26am UTC](https://forums.digi.com/t/x-bee-s3b-and-xctu-6-0/12662/3 "2014-03-14T11:26:21Z")

</div>

Once I go to configure, I go to network and Security Tab  
it offers the following:  
ID, Modem VID  
HP, Hopping Channel  
DT, Destination Address  
MY, Source Address  
MK, Address mask  
RR, Rentries  
RN, Delay Slots  
MD, RF Mode  
TT, Streaming Limit  
SY, Time before

It offer’s No CE available, this is running off the following firmware:

Product Family :XBP9B-XC  
Function: XBEE-PRO XSC(3B)

Caleb