# XB24CZ7WIT-004 and PIR HC-SR501

**URL:** <https://forums.digi.com/t/xb24cz7wit-004-and-pir-hc-sr501/20323>\
**Category:** XBee - 802.15.4\
**Tags:** api-mode, hc-sr501, xb24cz7wit-004, \-\
**Created:** [March 13, 2019, 10:09am UTC](https://forums.digi.com/t/xb24cz7wit-004-and-pir-hc-sr501/20323 "2019-03-13T10:09:11Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Setep](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@Setep](https://forums.digi.com/u/Setep)\
**Post date:** [March 13, 2019, 10:09am UTC](https://forums.digi.com/t/xb24cz7wit-004-and-pir-hc-sr501/20323/1 "2019-03-13T10:09:11Z")

</div>

Good night community.  
I am learning about the pins of the XBee module “XB24CZ7WIT-004”. I want to connect a motion sensor “PIR HC-SR501” directly, but without risk of decomposing my XBee module.  
Please, can you recommend the best way to connect it correctly?  
Thanks in advance.