# XBee 3 BLE C library for Arduino

**URL:** <https://forums.digi.com/t/xbee-3-ble-c-library-for-arduino/21927>\
**Category:** XBee - Zigbee\
**Tags:** bluetooth, clibrary, xbee3\
**Created:** [October 23, 2020, 8:34am UTC](https://forums.digi.com/t/xbee-3-ble-c-library-for-arduino/21927 "2020-10-23T08:34:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![eric987](https://avatars.discourse-cdn.com/v4/letter/e/67e7ee/32.png) [@eric987](https://forums.digi.com/u/eric987)\
**Post date:** [October 23, 2020, 8:34am UTC](https://forums.digi.com/t/xbee-3-ble-c-library-for-arduino/21927/1 "2020-10-23T08:34:13Z")

</div>

Hi,  
Is there a C library (possibly an extension of the existing Xbee.h library for Arduino ([https://github.com/andrewrapp/xbee-arduino](https://github.com/andrewrapp/xbee-arduino)) that would allow one to send and receive messages from a microcontroller (ideally Arduino) through the XBee 3 BLE interface.  
I have been sending/receiving message successfully through the Relay console using the frame generator - I would like to now embedded this into a project and start using the BLE interface in a similar way the XBee.h library allows the usage of API mode.

Thank you

Eric.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [October 23, 2020, 8:35am UTC](https://forums.digi.com/t/xbee-3-ble-c-library-for-arduino/21927/2 "2020-10-23T08:35:56Z")

</div>

I am not aware of any that will offer access to the New BLE functions found on the XBee 3.