# Xbee 868LP to XCTU 6.2 no answer

**URL:** <https://forums.digi.com/t/xbee-868lp-to-xctu-6-2-no-answer/15620>\
**Category:** XBee - DigiMesh\
**Tags:** connection, xbee868, xctu, ftdi, xbee\
**Created:** [October 20, 2015, 8:11am UTC](https://forums.digi.com/t/xbee-868lp-to-xctu-6-2-no-answer/15620 "2015-10-20T08:11:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![keflex87](https://avatars.discourse-cdn.com/v4/letter/k/bbe5ce/32.png) [@keflex87](https://forums.digi.com/u/keflex87)\
**Post date:** [October 20, 2015, 8:11am UTC](https://forums.digi.com/t/xbee-868lp-to-xctu-6-2-no-answer/15620/1 "2015-10-20T08:11:11Z")

</div>

Hello,

i want am connect a Xbee 868 (XB8-DMUSB002) with XCTU 6.2 over a FTDI-Cable ([http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS\_TTL-232RG\_CABLES.pdf](http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232RG_CABLES.pdf)). Unfortunately I get no response from the module if i add a module over XCTU. what is the bug?

Hardware connection:  
PIN1 –\> GND  
PIN2 –\> 3,3VDC  
PIN3 –\> FTDI-RXD  
PIN4 –\> FTDI-TXD

Trace on COM5:  
send:  
~…APe+++AT.  
(7E 00 04 08 01 41 50 65 2B 2B 2B 41 54 0D )

reply:  
nothing :blue:

thanks for your support  
Andre

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [October 21, 2015, 9:40am UTC](https://forums.digi.com/t/xbee-868lp-to-xctu-6-2-no-answer/15620/2 "2015-10-21T09:40:29Z")

</div>

That is NOT a standard XBee 868 LP module. That is a Programmable module. Which means that it has a 2nd processor on board which you Must write and upload code to via a BDM programmer before it will do anything.
