# xbee analog problem..

**URL:** <https://forums.digi.com/t/xbee-analog-problem/1683>\
**Category:** XBee - 802.15.4\
**Created:** [May 9, 2011, 1:33pm UTC](https://forums.digi.com/t/xbee-analog-problem/1683 "2011-05-09T13:33:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jonamreddy](https://avatars.discourse-cdn.com/v4/letter/j/858c86/32.png) [@jonamreddy](https://forums.digi.com/u/jonamreddy)\
**Post date:** [May 9, 2011, 1:33pm UTC](https://forums.digi.com/t/xbee-analog-problem/1683/1 "2011-05-09T13:33:20Z")

</div>

how do i transmit analog sensor values from transmitter xbee to receiver xbee. …

---

<div class="post-metadata">

**Author:** ![shahrj1988](https://avatars.discourse-cdn.com/v4/letter/s/c4cdca/32.png) [@shahrj1988](https://forums.digi.com/u/shahrj1988)\
**Post date:** [May 9, 2011, 2:31pm UTC](https://forums.digi.com/t/xbee-analog-problem/1683/2 "2011-05-09T14:31:53Z")

</div>

Hi Jonamreddy,

As you want to send the Sensor data from one XBee to the another XBee. This is possible using IO line Passing. This feature is enabled in XBee 802.15.4 modules.

See the Page No. 25 of XBee 802.15.4 Product Manual at the following link.  
[http://ftp1.digi.com/support/documentation/90000982\_B.pdf](http://ftp1.digi.com/support/documentation/90000982_B.pdf)