# Xbee configuration **URL:** \ **Category:** XBee & XBee Gateway\ **Tags:** xctu, xbee\ **Created:** [September 14, 2017, 1:59pm UTC](https://forums.digi.com/t/xbee-configuration/18719 "2017-09-14T13:59:13Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Madinagar](https://avatars.discourse-cdn.com/v4/letter/m/9fc29f/32.png) [@Madinagar](https://forums.digi.com/u/Madinagar)\ **Post date:** [September 14, 2017, 1:59pm UTC](https://forums.digi.com/t/xbee-configuration/18719/1 "2017-09-14T13:59:13Z")
I tried to configure 2 Xbees on a PC. Then I downloaded XCTU on aother PC and tried to connect the Xbees again…I keep receiving a msg that I have to reset the Xbees. Any Advice? ---
**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\ **Post date:** [September 14, 2017, 2:04pm UTC](https://forums.digi.com/t/xbee-configuration/18719/2 "2017-09-14T14:04:43Z")
What board are you connecting the XBee modules on? What is the part number of the XBee in question? What is the firmware version installed? ---
**Author:** ![Madinagar](https://avatars.discourse-cdn.com/v4/letter/m/9fc29f/32.png) [@Madinagar](https://forums.digi.com/u/Madinagar)\ **Post date:** [September 15, 2017, 2:33pm UTC](https://forums.digi.com/t/xbee-configuration/18719/3 "2017-09-15T14:33:08Z")
Thank you for your quick response It is a S2 series (XB24-ZB) I am using an xbee dongle Firmware version is 20A7 for the coordinator and 22A7 for the router ---
**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\ **Post date:** [September 15, 2017, 2:35pm UTC](https://forums.digi.com/t/xbee-configuration/18719/4 "2017-09-15T14:35:16Z")
who’s XBee dongle is it? You might need to adjust the driver settings for low speed serial devices.