# Xbee Maximal Speed

**URL:** <https://forums.digi.com/t/xbee-maximal-speed/1747>\
**Category:** XBee - 802.15.4\
**Created:** [November 14, 2011, 3:40pm UTC](https://forums.digi.com/t/xbee-maximal-speed/1747 "2011-11-14T15:40:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![peonazerty](https://avatars.discourse-cdn.com/v4/letter/p/ce7236/32.png) [@peonazerty](https://forums.digi.com/u/peonazerty)\
**Post date:** [November 14, 2011, 3:40pm UTC](https://forums.digi.com/t/xbee-maximal-speed/1747/1 "2011-11-14T15:40:58Z")

</div>

Hi !  
I have a simple question about Xbee : I would like to know if it is possible for a xbee module to send a simple char in less than 10 ms ?

I’m actually benchmarking the module with my computer and the digi’s xbee devel kit. My benchmark looks like this :

PC —serial(usb)— xbee _ **air** _ xbee —serial— Serial loop

I have made a simple tool to monitor how much time does it takes for a simple char to get the xbee serial card, and go back.

With 115200 baudrate, the whole chain takes around 16ms, which is too slow for my application.  
I get 0.5ms with the serial connexion ( PC ----UART---- Arduino) !

I have tried many different configurations in X-CTU, but none was faster than the basic default configuration…

Thank you for your answer.

---

<div class="post-metadata">

**Author:** ![peonazerty](https://avatars.discourse-cdn.com/v4/letter/p/ce7236/32.png) [@peonazerty](https://forums.digi.com/u/peonazerty)\
**Post date:** [November 16, 2011, 1:28pm UTC](https://forums.digi.com/t/xbee-maximal-speed/1747/2 "2011-11-16T13:28:21Z")

</div>

Thanks for your reply.  
Thank to the Digi’s USB card, especially the FTDI component, I had a 16ms latency. Now I know why…  
[http://ilektron-x.blogspot.com/2010/02/xbee-and-ftdi-latency-and-dropped.html](http://ilektron-x.blogspot.com/2010/02/xbee-and-ftdi-latency-and-dropped.html)
