# Xbee on Linux in AT mode

**URL:** <https://forums.digi.com/t/xbee-on-linux-in-at-mode/15419>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Tags:** xbee-api-mode, terminal, xbee\
**Created:** [September 17, 2015, 8:02am UTC](https://forums.digi.com/t/xbee-on-linux-in-at-mode/15419 "2015-09-17T08:02:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Abhishek](https://avatars.discourse-cdn.com/v4/letter/a/7ba0ec/32.png) [@Abhishek](https://forums.digi.com/u/Abhishek)\
**Post date:** [September 17, 2015, 8:02am UTC](https://forums.digi.com/t/xbee-on-linux-in-at-mode/15419/1 "2015-09-17T08:02:56Z")

</div>

Hello,  
I want to transmit and receive data in AT command mode using Linux terminal.  
Is there any way to do so?  
without XCTU?

Thanks

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 17, 2015, 8:44am UTC](https://forums.digi.com/t/xbee-on-linux-in-at-mode/15419/2 "2015-09-17T08:44:17Z")

</div>

Sure. Which XBee product are you using? I think you will find that short of using API mode or firmware upgrades, just about anything that can be done in XCTU can be done using a Terminal emulator or similar program.

---

<div class="post-metadata">

**Author:** ![Abhishek](https://avatars.discourse-cdn.com/v4/letter/a/7ba0ec/32.png) [@Abhishek](https://forums.digi.com/u/Abhishek)\
**Post date:** [September 18, 2015, 8:02am UTC](https://forums.digi.com/t/xbee-on-linux-in-at-mode/15419/3 "2015-09-18T08:02:28Z")

</div>

Hello

I am using XBee S2. I am familiar with XCTU software and I have also worked with it on my Controller. Now I want to work with it on Linux.  
So if there is any user guide or start-up guide to work with it it would be great.

Thank you  
Regards  
Abhishek Parikh

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 18, 2015, 4:05pm UTC](https://forums.digi.com/t/xbee-on-linux-in-at-mode/15419/4 "2015-09-18T16:05:03Z")

</div>

You can use the New XCTU 6.x version on Linux but Digi does not have a specific users guide or quick start guide for operating on Linux.

---

<div class="post-metadata">

**Author:** ![Abhishek](https://avatars.discourse-cdn.com/v4/letter/a/7ba0ec/32.png) [@Abhishek](https://forums.digi.com/u/Abhishek)\
**Post date:** [September 23, 2015, 12:20pm UTC](https://forums.digi.com/t/xbee-on-linux-in-at-mode/15419/5 "2015-09-23T12:20:08Z")

</div>

Hello,

Any C code working with Windows or linux ?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 23, 2015, 1:21pm UTC](https://forums.digi.com/t/xbee-on-linux-in-at-mode/15419/6 "2015-09-23T13:21:24Z")

</div>

The only sample Code that Digi offers is what is found in the Programmable XBee SDK.