# Xbee Pro S1 ADC input

**URL:** <https://forums.digi.com/t/xbee-pro-s1-adc-input/1927>\
**Category:** XBee - 802.15.4\
**Created:** [February 7, 2013, 1:08pm UTC](https://forums.digi.com/t/xbee-pro-s1-adc-input/1927 "2013-02-07T13:08:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![femur](https://avatars.discourse-cdn.com/v4/letter/f/ea666f/32.png) [@femur](https://forums.digi.com/u/femur)\
**Post date:** [February 7, 2013, 1:08pm UTC](https://forums.digi.com/t/xbee-pro-s1-adc-input/1927/1 "2013-02-07T13:08:13Z")

</div>

Hello, what is the best way to program an XBee Pro S1 to get a 0to1 V reading through its ADC and send it?

thanks in advance!

---

<div class="post-metadata">

**Author:** ![spastor](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@spastor](https://forums.digi.com/u/spastor)\
**Post date:** [February 13, 2013, 9:16pm UTC](https://forums.digi.com/t/xbee-pro-s1-adc-input/1927/2 "2013-02-13T21:16:47Z")

</div>

Hello Mauro,

Check [module’s documentation](http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/point-multipoint-rfmodules/xbee-series1-module#docs) on how to configure ADC and Digital I/O Line Support and the Sample Rate. Regards!

---

<div class="post-metadata">

**Author:** ![femur](https://avatars.discourse-cdn.com/v4/letter/f/ea666f/32.png) [@femur](https://forums.digi.com/u/femur)\
**Post date:** [February 17, 2013, 10:42pm UTC](https://forums.digi.com/t/xbee-pro-s1-adc-input/1927/3 "2013-02-17T22:42:52Z")

</div>

Hi Sebastian,  
Already did (at least the product manual) but i am confused!  
Regards