# XBEE PRO S2C as coordinator for Smart Energy Profile

**URL:** <https://forums.digi.com/t/xbee-pro-s2c-as-coordinator-for-smart-energy-profile/15903>\
**Category:** XBee - Zigbee\
**Tags:** xbee-pro-s2c-as-coor\
**Created:** [December 7, 2015, 1:34pm UTC](https://forums.digi.com/t/xbee-pro-s2c-as-coordinator-for-smart-energy-profile/15903 "2015-12-07T13:34:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bagdeparag](https://avatars.discourse-cdn.com/v4/letter/b/94ad74/32.png) [@bagdeparag](https://forums.digi.com/u/bagdeparag)\
**Post date:** [December 7, 2015, 1:34pm UTC](https://forums.digi.com/t/xbee-pro-s2c-as-coordinator-for-smart-energy-profile/15903/1 "2015-12-07T13:34:14Z")

</div>

I am trying to configure, XBEE PRO S2C as coordinator for Smart Energy profile to communicate with Smart Energy Meters. I am using 5132 firmware version. I am not able to change the Zigbee Protocol Addressing fields. It gives Invalid command in response. On the same XBee pro module the works properly. Please help and tell me, if I am doing anything wrong.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 7, 2015, 1:49pm UTC](https://forums.digi.com/t/xbee-pro-s2c-as-coordinator-for-smart-energy-profile/15903/2 "2015-12-07T13:49:16Z")

</div>

The smart energy code uses API mode for all interactions. Not the AT commands.

---

<div class="post-metadata">

**Author:** ![bagdeparag](https://avatars.discourse-cdn.com/v4/letter/b/94ad74/32.png) [@bagdeparag](https://forums.digi.com/u/bagdeparag)\
**Post date:** [December 9, 2015, 8:19am UTC](https://forums.digi.com/t/xbee-pro-s2c-as-coordinator-for-smart-energy-profile/15903/3 "2015-12-09T08:19:51Z")

</div>

Hey, I am using API command for interaction, still getting “invalid command” in response. Is any other way to change the Zigbee Protocol Addressing parameters like: Source Endpoint, Cluster ID etc.
