# XBee S2 going on bursts in simplest setup (video included)

**URL:** <https://forums.digi.com/t/xbee-s2-going-on-bursts-in-simplest-setup-video-included/17104>\
**Category:** XCTU\
**Tags:** s2, bursts, xbee-pro, xbee\
**Created:** [July 19, 2016, 8:12am UTC](https://forums.digi.com/t/xbee-s2-going-on-bursts-in-simplest-setup-video-included/17104 "2016-07-19T08:12:01Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![raullapeira](https://avatars.discourse-cdn.com/v4/letter/r/76d3ee/32.png) [@raullapeira](https://forums.digi.com/u/raullapeira)\
**Post date:** [July 19, 2016, 8:12am UTC](https://forums.digi.com/t/xbee-s2-going-on-bursts-in-simplest-setup-video-included/17104/1 "2016-07-19T08:12:01Z")

</div>

You can see in the video the issue:

[https://www.youtube.com/watch?v=5VaERchlLc4&amp;feature=youtu.be](https://www.youtube.com/watch?v=5VaERchlLc4&amp;feature=youtu.be)

In a very simple setup I have XBee S2 XB24-Z7WIT communicating with bursts between one another… I can share the config if needed, but it is mostly the default config but putting them both in the same PANID…

Any idea? any more information I can provide?

---

<div class="post-metadata">

**Author:** ![csreddy](https://avatars.discourse-cdn.com/v4/letter/c/13edae/32.png) [@csreddy](https://forums.digi.com/u/csreddy)\
**Post date:** [July 20, 2016, 12:48am UTC](https://forums.digi.com/t/xbee-s2-going-on-bursts-in-simplest-setup-video-included/17104/2 "2016-07-20T00:48:45Z")

</div>

can you please enable CTS and RTS flow control pin?  
if your not enable that pin please enable and check it once?

---

<div class="post-metadata">

**Author:** ![raullapeira](https://avatars.discourse-cdn.com/v4/letter/r/76d3ee/32.png) [@raullapeira](https://forums.digi.com/u/raullapeira)\
**Post date:** [August 1, 2016, 9:04am UTC](https://forums.digi.com/t/xbee-s2-going-on-bursts-in-simplest-setup-video-included/17104/3 "2016-08-01T09:04:46Z")

</div>

Tbh it worked the next day without any changes… no idea on my side so I accepted your answer as it was the only one (CTS and RTS was enabled from the beginning)
