# xbee s2b SMA connector

**URL:** <https://forums.digi.com/t/xbee-s2b-sma-connector/17827>\
**Category:** Other & Legacy Products\
**Tags:** xbee\
**Created:** [December 23, 2016, 11:25am UTC](https://forums.digi.com/t/xbee-s2b-sma-connector/17827 "2016-12-23T11:25:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![doraemon0041](https://avatars.discourse-cdn.com/v4/letter/d/7ab992/32.png) [@doraemon0041](https://forums.digi.com/u/doraemon0041)\
**Post date:** [December 23, 2016, 11:25am UTC](https://forums.digi.com/t/xbee-s2b-sma-connector/17827/1 "2016-12-23T11:25:02Z")

</div>

Hi everyone, due to my stupidity I broke SMA connector of Xbee S2B module. Is it possible to replace the connector or solder wire antenna?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [April 11, 2017, 2:57pm UTC](https://forums.digi.com/t/xbee-s2b-sma-connector/17827/2 "2017-04-11T14:57:58Z")

</div>

You would need to replace the RPSMA connection. You are going to need to be care full not to damage any other components while you remove and solder on a new one.