# XBee s2c configure as coordinator at

**URL:** <https://forums.digi.com/t/xbee-s2c-configure-as-coordinator-at/16603>\
**Category:** XBee & XBee Gateway\
**Tags:** xbee-pro-s2c-as-coor\
**Created:** [April 17, 2016, 12:42am UTC](https://forums.digi.com/t/xbee-s2c-configure-as-coordinator-at/16603 "2016-04-17T00:42:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lilyhack](https://avatars.discourse-cdn.com/v4/letter/l/13edae/32.png) [@lilyhack](https://forums.digi.com/u/lilyhack)\
**Post date:** [April 17, 2016, 12:42am UTC](https://forums.digi.com/t/xbee-s2c-configure-as-coordinator-at/16603/1 "2016-04-17T00:42:29Z")

</div>

I am using X-CTU v6.3 in Mac OS X El Capitan

XBee S2C

In XCTU, the device is detected as  
Function: ZIGBEE TH Reg  
Product Family: XB24C  
Firmware version: 4059

How do I configure it as a Coordinator at AT mode?

The update firmware button doesn’t show anything beyond the function and product family mentioned above.

---

<div class="post-metadata">

**Author:** ![fuyacho](https://avatars.discourse-cdn.com/v4/letter/f/b9e5f3/32.png) [@fuyacho](https://forums.digi.com/u/fuyacho)\
**Post date:** [April 18, 2016, 8:04am UTC](https://forums.digi.com/t/xbee-s2c-configure-as-coordinator-at/16603/2 "2016-04-18T08:04:59Z")

</div>

You can do it on XCTU, open configuration of the device and you find many items there. Under “Networking” category find “CE coordinator Enable” which is “Disabled [0]” by default.Turn it “Enabled[1]” and save the configuration. That’s all.  
Good luck!