# xbee s2c cordinator console double color issue

**URL:** <https://forums.digi.com/t/xbee-s2c-cordinator-console-double-color-issue/18122>\
**Category:** XBee - 802.15.4\
**Tags:** console, coordinator\
**Created:** [March 8, 2017, 1:48pm UTC](https://forums.digi.com/t/xbee-s2c-cordinator-console-double-color-issue/18122 "2017-03-08T13:48:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![oggy](https://avatars.discourse-cdn.com/v4/letter/o/df705f/32.png) [@oggy](https://forums.digi.com/u/oggy)\
**Post date:** [March 8, 2017, 1:48pm UTC](https://forums.digi.com/t/xbee-s2c-cordinator-console-double-color-issue/18122/1 "2017-03-08T13:48:11Z")

</div>

Hi all I set up 2 zigbee s2c modules on at mode and define coordinator at one device. at the console i can send from end device to coordinator however when i write something at the coordinator side written letters repeat themselves in blue and red order and i cant see the message at the end side?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [March 8, 2017, 2:09pm UTC](https://forums.digi.com/t/xbee-s2c-cordinator-console-double-color-issue/18122/2 "2017-03-08T14:09:24Z")

</div>

Check your DL and DH values. Most likely they are 0 which is the address for the coordinator. Change them to the SL and SH of your end device or router and that should solve it.