# xbee s2c programming

**URL:** <https://forums.digi.com/t/xbee-s2c-programming/17846>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Tags:** codewarrior, s2c, grove-development-bo, \-xbee, xbee\
**Created:** [January 3, 2017, 8:58am UTC](https://forums.digi.com/t/xbee-s2c-programming/17846 "2017-01-03T08:58:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![siddharthtaunk](https://avatars.discourse-cdn.com/v4/letter/s/df705f/32.png) [@siddharthtaunk](https://forums.digi.com/u/siddharthtaunk)\
**Post date:** [January 3, 2017, 8:58am UTC](https://forums.digi.com/t/xbee-s2c-programming/17846/1 "2017-01-03T08:58:22Z")

</div>

Hi Digi,

When I enter into the bootloader mode for the xbee I do not see the window which is mentioned in the following link

[http://xbee-sdk-doc.readthedocs.io/en/1.5.7/doc/tips\_tricks/](http://xbee-sdk-doc.readthedocs.io/en/1.5.7/doc/tips_tricks/)

but instead i get the screen mentioned in the following link.

[http://www.digi.com/wiki/developer/index.php/Bootloader\_to\_force\_XBee\_reflash](http://www.digi.com/wiki/developer/index.php/Bootloader_to_force_XBee_reflash) (sorry was not able to upload image)

How to program the application in the xbee s2c module?

There is a tutorial but its based on the first link.  
kindly help

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [January 3, 2017, 9:01am UTC](https://forums.digi.com/t/xbee-s2c-programming/17846/2 "2017-01-03T09:01:53Z")

</div>

You don’t have a programmable module. From the sounds of it, you have a standard module. What is the full part number of the module you have? If you provide it, I can tell you off of the part number which it is.