# Xbee S2C Sleep Mode

**URL:** <https://forums.digi.com/t/xbee-s2c-sleep-mode/18446>\
**Category:** XBee - Zigbee\
**Tags:** xbee-s2c, xbee\
**Created:** [June 15, 2017, 1:41pm UTC](https://forums.digi.com/t/xbee-s2c-sleep-mode/18446 "2017-06-15T13:41:12Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kelvinkalariya](https://avatars.discourse-cdn.com/v4/letter/k/da6949/32.png) [@kelvinkalariya](https://forums.digi.com/u/kelvinkalariya)\
**Post date:** [June 15, 2017, 1:41pm UTC](https://forums.digi.com/t/xbee-s2c-sleep-mode/18446/1 "2017-06-15T13:41:12Z")

</div>

Can anyone tell me how to configure my xbee in sleep mode?  
I am using Xbee s2C Model.

Regards,  
Kelvin Kalariya.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [June 15, 2017, 1:45pm UTC](https://forums.digi.com/t/xbee-s2c-sleep-mode/18446/2 "2017-06-15T13:45:54Z")

</div>

Actually it is really simple, set SM to a value greater than 0. Then set your SP and ST to the desired values.

---

<div class="post-metadata">

**Author:** ![kelvinkalariya](https://avatars.discourse-cdn.com/v4/letter/k/da6949/32.png) [@kelvinkalariya](https://forums.digi.com/u/kelvinkalariya)\
**Post date:** [June 16, 2017, 9:04am UTC](https://forums.digi.com/t/xbee-s2c-sleep-mode/18446/3 "2017-06-16T09:04:31Z")

</div>

Thank you for your suggestion.  
My Question is that suppose I want to configure sleep mode using PIN MODE than how it can be possible ?

Regards,  
Kelvin

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [June 16, 2017, 9:08am UTC](https://forums.digi.com/t/xbee-s2c-sleep-mode/18446/4 "2017-06-16T09:08:37Z")

</div>

That would be setting the SM command to a value of 1. Then drive the sleep request line accordingly.