# XBee S6B API AT Comunication.

**URL:** <https://forums.digi.com/t/xbee-s6b-api-at-comunication/19876>\
**Category:** XBee - WiFi\
**Tags:** s6b, at, comunication, api, xbee\
**Created:** [September 14, 2018, 3:43pm UTC](https://forums.digi.com/t/xbee-s6b-api-at-comunication/19876 "2018-09-14T15:43:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Marco\_Polisel](https://avatars.discourse-cdn.com/v4/letter/m/e99b99/32.png) [@Marco\_Polisel](https://forums.digi.com/u/Marco_Polisel)\
**Post date:** [September 14, 2018, 3:43pm UTC](https://forums.digi.com/t/xbee-s6b-api-at-comunication/19876/1 "2018-09-14T15:43:17Z")

</div>

Hi, Guys.

I’d like to send and receive AT Commands in API mode to/from a XBee S6B/Pro logged on my home network thru my internet router.  
Is is possible to do this ? Can I read the XBee pin state using simply the putty software just calling device’s IP and port ?  
If the answer was positive, can you explain the method here ?

Thank’s