# XBee Wifi Multi-Hop Ad-Hoc Network
**URL:** https://forums.digi.com/t/xbee-wifi-multi-hop-ad-hoc-network/12628
**Category:** XBee - WiFi
**Tags:** wifi, xbee, ad-hoc, multi-hop
**Created:** [March 5, 2014, 3:15am UTC](https://forums.digi.com/t/xbee-wifi-multi-hop-ad-hoc-network/12628 "2014-03-05T03:15:09Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@m.bassalious](https://forums.digi.com/u/m.bassalious)
#### Post date: [March 5, 2014, 3:15am UTC](https://forums.digi.com/t/xbee-wifi-multi-hop-ad-hoc-network/12628/1 "2014-03-05T03:15:09Z")
I am looking to create a wireless network along a non-linear path that will allow me to remotely control and receive a video stream from a mobile vehicle.
A fixed transmitter will transmit to a moving receiver on the vehicle. The vehicle should have multiple XBee Wifi modules on board which it will drop and activate once the original signal has attenuated to a certain point.
The idea is that
Transmitter \>\>\>Receiver
Signal attenuates. XBee Dropped
Transmitter \>\>\> XBee1\>\>\>Receiver
Signal attenuates. XBee Dropped
Transmitter \>\>\> XBee1\>\>\>XBee2\>\>\>Receiver
Etc
I’m interested to know whether this is feasible or whether there is an alternate approach that would allow this functionality to be implemented.
---
### Author:  [@mvut](https://forums.digi.com/u/mvut)
#### Post date: [May 7, 2014, 10:54am UTC](https://forums.digi.com/t/xbee-wifi-multi-hop-ad-hoc-network/12628/2 "2014-05-07T10:54:26Z")
No, the XBee WIFI modules do not have the ability to rout data. They must be connected to a Gateway directly or directly with another WIFI Device in an AdHoc connection.