# XBEE XBP24C digimesh DN (disocvery node) command

**URL:** <https://forums.digi.com/t/xbee-xbp24c-digimesh-dn-disocvery-node-command/22849>\
**Category:** XBee - DigiMesh\
**Tags:** configuration, at, at-commands, xbee-pro, digimesh\
**Created:** [December 10, 2021, 10:51am UTC](https://forums.digi.com/t/xbee-xbp24c-digimesh-dn-disocvery-node-command/22849 "2021-12-10T10:51:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![accacca](https://avatars.discourse-cdn.com/v4/letter/a/8dc957/32.png) [@accacca](https://forums.digi.com/u/accacca)\
**Post date:** [December 10, 2021, 10:51am UTC](https://forums.digi.com/t/xbee-xbp24c-digimesh-dn-disocvery-node-command/22849/1 "2021-12-10T10:51:16Z")

</div>

We have this digimesh network configuration

Coordinator–\>Repeater–\>Endpoint2  
|  
|  
Endpoint1

All devices are PRO S2C, always ON and communicate each others  
Repeater was removed from the network (powered off)  
Endpoint2 was powered off and moved near coordinator (15cm) then powered on  
At powerup, Endpoint search the Coordinator node using DN command with coordinator name (NI coordinator string)  
Endpoint send DN command three times but command always return error Tried more times the procedure powering up the Endpoint.  
But after reset Coordinator radio Endpoint2 discover Coordinator node every time without problems.  
Seems that Coordinator can’t reply to DN request if the Endpoint2 was initially connected beyond Repeater.
