# Xbee ZigBee Pro (S2C) with Anaren AIR ZigBee

**URL:** <https://forums.digi.com/t/xbee-zigbee-pro-s2c-with-anaren-air-zigbee/16608>\
**Category:** XBee & XBee Gateway\
**Tags:** s2c, interoperability, xbee-pro, xbee, zigbee\
**Created:** [April 17, 2016, 5:56pm UTC](https://forums.digi.com/t/xbee-zigbee-pro-s2c-with-anaren-air-zigbee/16608 "2016-04-17T17:56:07Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![lilyhack](https://avatars.discourse-cdn.com/v4/letter/l/13edae/32.png) [@lilyhack](https://forums.digi.com/u/lilyhack)\
**Post date:** [April 17, 2016, 5:56pm UTC](https://forums.digi.com/t/xbee-zigbee-pro-s2c-with-anaren-air-zigbee/16608/1 "2016-04-17T17:56:07Z")

</div>

I am working on a scenario where XBee ZigBee Pro (S2C) is a coordinator and Anaren AIR ZigBee (based on TI CC2530) modules are router/end devices

I am using

-Anaren AIR A2530E24A-LPZ module with MSP430G2

-Xbee ZigBee Pro (S2C) with Raspberry Pi

I was able to communicate between co-ordinator, router and end-devices of AIR A2530E24A-LPZ modules. Also can separately work with Xbee modules. Problem happens when I try to communicate between Xbee and AIR modules.

1. Does Xbee ZigBee Pro (S2C) support AIR A2530E24A-LPZ?

2. If I want to use Xbee was the coordinator and A2530E24A-LPZ modules as router/end devices, what network configurations I should be aware off? Channel? PAN ID? What else?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [April 18, 2016, 8:39am UTC](https://forums.digi.com/t/xbee-zigbee-pro-s2c-with-anaren-air-zigbee/16608/2 "2016-04-18T08:39:56Z")

</div>

I have never used an XBee with a AIR A2530E24A-LPZ so I don’t know. But if you set the XBee ZS parameter to either 1 or 2, providing that the AIR A2530E24A-LPZ is functioning on a Zigbee 2006 or 2007 PRO Public profile they should be able to communicate.

---

<div class="post-metadata">

**Author:** ![lilyhack](https://avatars.discourse-cdn.com/v4/letter/l/13edae/32.png) [@lilyhack](https://forums.digi.com/u/lilyhack)\
**Post date:** [April 18, 2016, 12:01pm UTC](https://forums.digi.com/t/xbee-zigbee-pro-s2c-with-anaren-air-zigbee/16608/3 "2016-04-18T12:01:05Z")

</div>

I just tried that, zs=1 or zs=2, setting xbee as the co-ordinator and AIR A2530E24A-LPZ as the End Device but didnt work.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [April 18, 2016, 1:17pm UTC](https://forums.digi.com/t/xbee-zigbee-pro-s2c-with-anaren-air-zigbee/16608/4 "2016-04-18T13:17:29Z")

</div>

That would indicated that the AIR 2530 device is not using a Zigbee public profile but a private profile. Which means that you are not going to get the AIR device to associate with anyone else.