# Xbee3 configuration

**URL:** <https://forums.digi.com/t/xbee3-configuration/22682>\
**Category:** XBee - 802.15.4\
**Tags:** xctu, xbee3\
**Created:** [September 23, 2021, 8:39am UTC](https://forums.digi.com/t/xbee3-configuration/22682 "2021-09-23T08:39:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nj\_B125](https://avatars.discourse-cdn.com/v4/letter/n/e56c9b/32.png) [@Nj\_B125](https://forums.digi.com/u/Nj_B125)\
**Post date:** [September 23, 2021, 8:39am UTC](https://forums.digi.com/t/xbee3-configuration/22682/1 "2021-09-23T08:39:26Z")

</div>

Hey Guys,

```
      I am working with Xbee3 module. I have two Xbee3 module. I have configured one module as Xbee3 COORDINATOR and the other module as ROUTER in transparent mode. At this point I am able to communicate between these two modules in TRANSPARENT MODE. 

```

But when I configure both these modules in API MODE , I am not able to see any communication between these two modules.

Can you guys share me configuration settings in API MODE?

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 27, 2021, 9:57am UTC](https://forums.digi.com/t/xbee3-configuration/22682/2 "2021-09-27T09:57:36Z")

</div>

API modem means that you are going to send ALL data in and out of the radios UART using the Digi API Hex frames. See [https://www.digi.com/resources/documentation/digidocs/90001539/#containers/cont\_zb\_api\_operation.htm?TocPath=API%2520Operation%257C\_\_\_\_\_0](https://www.digi.com/resources/documentation/digidocs/90001539/#containers/cont_zb_api_operation.htm?TocPath=API%2520Operation%257C _____ 0)
