# XbeeS2c rf module power problem

**URL:** <https://forums.digi.com/t/xbees2c-rf-module-power-problem/19190>\
**Category:** XBee & XBee Gateway\
**Tags:** xbees2\
**Created:** [February 16, 2018, 11:47am UTC](https://forums.digi.com/t/xbees2c-rf-module-power-problem/19190 "2018-02-16T11:47:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Firaz](https://avatars.discourse-cdn.com/v4/letter/f/a88e4f/32.png) [@Firaz](https://forums.digi.com/u/Firaz)\
**Post date:** [February 16, 2018, 11:47am UTC](https://forums.digi.com/t/xbees2c-rf-module-power-problem/19190/1 "2018-02-16T11:47:58Z")

</div>

i’m trying to drive xbee from arduino gpio but xbee is not working!! i’m getting 3.5V 50mA @ arduino gpio pin. if i supplied 3.3V from arduino then it’s working. but it is not driven by arduino gipo pin ? Please help me ASAP
