XBIB-R dev always returns false for switches using SCI/RCI on idigi

Python
1

Hi all,
I have an XBIB-R DEV board configured through DIA on my ConnectPort X4. I am experimenting with SCI/RCI through the idigi platform and can get a “channel_get” and “channel_set” to work great with the leds. However when getting a “channel_get” for the switches, I always get a “false” reading even though I hold down the switches during the whole transaction. If I connect directly to the gateway, I get accurate readings, though sometimes it fails. Something is getting lost when going through idigi platform.

Any suggestions?

2

Make sure you’re using the latest Dia, downloaded within the last week. This was a known problem with older versions.