# XBP24 to XBP24-ZB

**URL:** <https://forums.digi.com/t/xbp24-to-xbp24-zb/509>\
**Category:** XBee - Zigbee\
**Created:** [November 13, 2008, 8:10pm UTC](https://forums.digi.com/t/xbp24-to-xbp24-zb/509 "2008-11-13T20:10:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alverick](https://avatars.discourse-cdn.com/v4/letter/a/e480ec/32.png) [@Alverick](https://forums.digi.com/u/Alverick)\
**Post date:** [November 13, 2008, 8:10pm UTC](https://forums.digi.com/t/xbp24-to-xbp24-zb/509/1 "2008-11-13T20:10:39Z")

</div>

Is it possible? The reason is that I want to use a mesh network, and it’s not possible with the 802.15.4 version (I think…) Thanks for your answers!

---

<div class="post-metadata">

**Author:** ![fordcf2000](https://avatars.discourse-cdn.com/v4/letter/f/82dd89/32.png) [@fordcf2000](https://forums.digi.com/u/fordcf2000)\
**Post date:** [November 14, 2008, 1:38am UTC](https://forums.digi.com/t/xbp24-to-xbp24-zb/509/2 "2008-11-14T01:38:57Z")

</div>

The XBP24-ZB is firmware for the series 2 Xbee, but digimesh is now available for the Series 1. In X-CTU set the modem type to XBP24-DM. That should get you set up on mesh.

---

<div class="post-metadata">

**Author:** ![Alverick](https://avatars.discourse-cdn.com/v4/letter/a/e480ec/32.png) [@Alverick](https://forums.digi.com/u/Alverick)\
**Post date:** [November 14, 2008, 1:34pm UTC](https://forums.digi.com/t/xbp24-to-xbp24-zb/509/3 "2008-11-14T13:34:40Z")

</div>

Thanks, I read about digimesh, but I’m getting an error when uploading the firmware… I’ll check about this in the forum for digimesh and series 1… Thanks a lot!