# XCTU discover sleeping device

**URL:** <https://forums.digi.com/t/xctu-discover-sleeping-device/18451>\
**Category:** USB\
**Tags:** sleep, end-device, xctu\
**Created:** [June 16, 2017, 11:44am UTC](https://forums.digi.com/t/xctu-discover-sleeping-device/18451 "2017-06-16T11:44:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![janis.plots](https://avatars.discourse-cdn.com/v4/letter/j/3e96dc/32.png) [@janis.plots](https://forums.digi.com/u/janis.plots)\
**Post date:** [June 16, 2017, 11:44am UTC](https://forums.digi.com/t/xctu-discover-sleeping-device/18451/1 "2017-06-16T11:44:38Z")

</div>

I have configured commissioning button as analog input and my device is configured as sleeping.  
Is there a way for me to find it in XCTU or have I blundered beyond point of return?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [June 16, 2017, 11:49am UTC](https://forums.digi.com/t/xctu-discover-sleeping-device/18451/2 "2017-06-16T11:49:50Z")

</div>

You can discover it. Just you are going to need to use the UART and use Hardware flow control.

If you want to view it from the RF Side, then it may take a few Discoveries from your Coordinator to find it.

Oh and you can always use the Reset line to wake the module back up.

---

<div class="post-metadata">

**Author:** ![janis.plots](https://avatars.discourse-cdn.com/v4/letter/j/3e96dc/32.png) [@janis.plots](https://forums.digi.com/u/janis.plots)\
**Post date:** [June 19, 2017, 9:00am UTC](https://forums.digi.com/t/xctu-discover-sleeping-device/18451/3 "2017-06-19T09:00:34Z")

</div>

Didn’t work any of those, but I found xbee recovery in XCTU under Tools -\> Xbee recovery

Manage to reset it completely. Thanks anyway for your time