# xctu set up for xsc from router to Coordinator

**URL:** <https://forums.digi.com/t/xctu-set-up-for-xsc-from-router-to-coordinator/12675>\
**Category:** XCTU\
**Tags:** api-mode, mesh-network, xctu, routing, xbee\
**Created:** [March 17, 2014, 4:43am UTC](https://forums.digi.com/t/xctu-set-up-for-xsc-from-router-to-coordinator/12675 "2014-03-17T04:43:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![psireaper9](https://avatars.discourse-cdn.com/v4/letter/p/e9bcb4/32.png) [@psireaper9](https://forums.digi.com/u/psireaper9)\
**Post date:** [March 17, 2014, 4:43am UTC](https://forums.digi.com/t/xctu-set-up-for-xsc-from-router-to-coordinator/12675/1 "2014-03-17T04:43:19Z")

</div>

Once I go to configure, I go to network and Security Tab  
it offers the following:  
ID, Modem VID  
HP, Hopping Channel  
DT, Destination Address  
MY, Source Address  
MK, Address mask  
RR, Rentries  
RN, Delay Slots  
MD, RF Mode  
TT, Streaming Limit  
SY, Time before

It offer’s No CE available, as in i’m not really sure how to change something to  
◦C: Coordinator  
◦R: Router

I am doing simply trying to do a simple range test off of the two development boards. If anyone can give me any advice on how to set these up it would be very appreciative.

Product Family :XBP9B-XC  
Function: XBEE-PRO XSC(3B)

It should be noted i’m using xctu 6.0

Caleb

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [May 6, 2014, 11:58am UTC](https://forums.digi.com/t/xctu-set-up-for-xsc-from-router-to-coordinator/12675/2 "2014-05-06T11:58:46Z")

</div>

The XSC is not a mesh based product. It is a point to point/mulch-point based product. It dos not use Coordinator or router functions this is why you can’t set them,